Home / IN DUCTS

IN DUCTS

IKС...–М... Multitube optical fibre cable for duct installation

INTEGRA optical fibre cables are designed for the installation in telecommunicational networks. This type of cables can be buried in the grounds of the 1-3 groups, installed in ducts, over the bridges and overpasses, in tunnels, in sewer ducts, inside the buildings. 

When installed in sewer ducts, in tunnels and inside buildings the outer sheath of the cables should be produced of the flame-proof materials (IKCN, IKCLN, IKCLng) also smoke-free and halogen-free materials (IKCLng(B)-HF).

Optical fibre cables for the installation in ducts IKC... are produced according to TS № 3587–004–95485862–2009.
Special characteristics of optical fibre cables:
Light-weight construction (without intermediate coating) — IKCL–… .
Fire-resistant — IKCN–…; IKCLN–(IKSLng(С), IKCLng(В)-HF)… .

Cable type IKC…-М…
Construction multitube
Maximum number of optical fibres in the cable 576
Number of tubes stranded around central strength member 4-36
Minimum outer diameter, мм 11,2
Minimum weight from, kg/кm 138
Minimum long-term tension, кN 1,5
Minimum crush resistance, kN/cm 0,3
Minimum allowed impact resistance, J 10
Minimum bending radius 20 Ø OD
Operating teperature range, °С from -50 to +50 
Minimum Installation temperature, °С -30

IKCN-М6P-А36-2.7

IK – INTEGRA-CABLE optical fibre cable
С – armoured with bouble plastic-coated corrugated steel tape
N – flame-proof outer sheath
М – multitube construction 
6 – number of tubes stranded around the central strength memeber
P – central strength member (fiberglass rod)
А – optical fibre (single-mode, ITU-T G.652.С(D))
36 – number of optical fibres in the cable
2.7 – maximum tension allowed, kN

  •  The operating temperature range can be extended from –60°С to +70°С.
00.00.0000 00:00